Dryridge Roofing & Building provides dry verge systems across Dover, Deal, Folkestone, Canterbury and the rest of East Kent. The verge is the edge of the roof at the gable end. Every job starts with a free survey and a fixed written quote.
The verge is the edge of the roof at the gable end. Traditionally it is finished with mortar, which cracks, falls out and lets water and birds in, often within a few years in an exposed coastal location.
A dry verge system replaces the mortar with interlocking uPVC caps that are mechanically fixed to each row of tiles. It is neat, secure, and keeps water and nesting birds out. You can forget about it once it is on.
Signs you need dry verge systems
- Mortar missing or crumbling along the gable edge
- Mortar debris on paths, patios or in gutters
- Birds nesting in gaps at the edge of the roof
- Loose or rocking tiles at the verge
Your dry verge systems options
Continuous dry verge
Interlocking units run the full length of the verge for a clean, uniform finish.
Colour-matched caps
Black, brown, grey, terracotta and more to match your tiles and roofline.
With fascia & soffit upgrade
Fit at the same time as new uPVC fascias and soffits for a complete roofline makeover.
How we work
Survey
We check the verge, tiles, undercloak and timber barge boards.
Remove old mortar
Loose mortar removed and the edge prepared and made sound.
Fit the system
Starter, units and ridge end cap fitted and fixed to every course.
Finish & tidy
Neat, straight lines and all debris cleared away.
Why it is worth doing properly
- No more repointing, ever
- Complies with BS 5534 mechanical fixing requirements
- Keeps birds and pests out of the roof edge
- Smart, modern finish that boosts kerb appeal
Dry Verge Systems: frequently asked questions
Is dry verge worth it?
For most homes, yes. You stop paying to repoint verge mortar every few years, and the roof edge is more secure in high winds.
Does dry verge suit every roof?
It suits most concrete interlocking and many plain tile roofs. Some older or listed properties need a traditional finish. We will advise at the survey.
Can dry verge blow off?
Properly fitted dry verge is mechanically fixed to every tile course and battens, so it is designed to stay put in high winds. Problems usually come from poorly fitted systems.
Helpful guides
Dry Verge Systems near you
We provide dry verge systems throughout East Kent, including: